Department of Mechanical Engineering and Engineering is approved as a Nodal Center under Anna University for pursuing Ph.D/ M.S(By Research). Approval detail is (Lr.No:222/IR/CSE/AIR) dated 04/03/2010 and latest renewal letter Lr.No.1304 / IR / CSE / AR2 Dated: 08.10.2021 valid till December 2024.
Academic Year | Name of the Faculty | Project Title | Funding Agency | Amount ( Rs) | Status |
2020-2021 | Dr. R. Ramadoss Dr. M. Vetrivel Sehiyan | Formability Study of Titanium Alloy Ti-6Al-7Nb at elevated Temperatures for Biomedical applications | TNSCST | 3.4 Lakhs | Ongoing |
2020-2021 | Dr. V. Antony Aroul Raj | User friendly functional simulation tool development through experimental validation for integration of PCM in energy efficient buildings for thermal management | DST IPHEE | 33.06 Lakhs | Completed |
S. No. | Academic Year | Title of the Patent | Name of the Inventor | Patent No. |
1. | 2021-2022 | Eco-Friendly And Cost-Effective Panels for Smart Grids From Spatiotemporal Optimization Of Charging E-Vehicles | Mr.V.M.Jothiprakash | 202241030671A |
2. | 2020-2021 | Solar Thermal and Pv-T Systems for Domestic Applications | Dr. D. Peter Pushpanathan | 202141010836A |
3. | 2020-2021 | Heat Transfer Analysis on Grooved Tubes Through A Friction Analysis On Diesel Engine Cylinder | Dr. D. Peter Pushpanathan | 202141012149A |
4. | 2020-2021 | A Novel Method of Big Data Retrieval System Using Machine Learning | Mr.V.M.Jothiprakash | 2021100011 |
5. | 2020-2021 | Dynamic Legged Locomotion Process Using the Spring Loaded Inverted Pendulum (Slip) For Soft Robot | Mr.V.M.Jothiprakash | 2021100083 |
6. | 2020-2021 | Heat Transfer Analysis on Grooved Tubes Through A Friction Analysis On Diesel Engine Cylinder | Mr.V.M.Jothiprakash | 202141012149 |
7. | 2020-2021 | Experimental Study on Partial Replacement of Plastic Wastes In Bricks | Mr. R.Jeremiah | 202141012153A |
8. | 2020-2021 | Fiber Reinforced Plastic Composite Material Used Inembossing Bumper | Mr. R.Jeremiah | 202141005816 |
9. | 2020-2021 | Solar Thermal and Pv-T Systems For Domestic Applications | Mr. M. Raju | 202141010836A |
10. | 2020-2021 | Automatic Spice and Oil Dispenser | Dr. M. Vetrivel Sezhian, Dr.S.Prasanna Raj Yadav, Mr.B.Elumalai | 202141061296 |
11. | 2019-2020 | A Power Generation Facemask. | Mr. B.Gopinath | 202041034633A |
12. | 2019-2020 | Conversion Of Sliding Mode Controller to Grid Connected Pv System For Boosting The Power For Inverter | Mr. V.M.Jothiprakash | 202041048086 |
13. | 2019-2020 | System And Method for Forced Heat Transfer Water Cooling In Thermoelectic Generator | Mr. V.M.Jothiprakash | 202041052806 |
14. | 2019-2020 | Iot Based Municipal Garbage Monitoring System for The Smart Cities
| Mr. V.M.Jothiprakash | 202041047751 |
15. | 2019-2020 | Process For Converting Waste Plastics Into Fuels | Dr.S.Prasanna Raj Yadav | 202041006462 |
16. | 2019-2020 | A Method and Apparatus For Cooling Multi-Chip Packages Using Tapered Nozzles | Dr. M. Vetrivel Sezhian | 202041006227 |
17. | 2019-2020 | Groundnut Seperator and Decorticator | Mr. B.Gopinath | 201941048531 |
18. | 2019-2020 | Wind Powered Operated Pump | Dr.S.Prasanna Raj Yadav | 201941052755 |
Academic Year (2022-2023)
Sl. No. | Name of the faculty | Research Paper Title | Index | Impact factor | Month & Year | Volume/ Issue/ Pg. no. | Journal Name |
1. | S. Sathyanarayanan | Experimental investigation and performance prediction of gasoline engine operating parameters fueled with diisopropyl ether-gasoline blends: Response surface methodology based optimization | SCI | 11.07 | September 2022 | Volume 375 | Journal of Cleaner Production |
2. | K. Thavasilingam | Experimental assessment on the contact characteristics of 3D printed flexible poly lactic acid (PLA) soft fingertips | SCI | 0.678 | October 2022 | Volume 113 issue 12 | International Journal of Material Research |
3. | K. Thavasilingam | Synthesis and characterization of fumed silica dispersed bees/ carnauba wax‑epoxy biocomposite coating: a comparative study | SCI | 4.05 | March 2023 | 2023 | Biomass Conversion and Biorefinery |
4. | J. Paulmar Pushparaj | Taguchi-Based Artificial Neural Network Modeling of Friction Process on Aluminum Alloy Reinforced with SiC Nanoparticles | SCI | – | February 2023 | Volume 2023 | Journal of Nanomaterials |
5. |
V. M. Jothiprakash | Optimization of Process Parameters for Friction Stir Welding of Different Aluminum Alloys AA2618 to AA5086 by Taguchi Method | SCI | 2.09 |
February 2022 | Volume 2022 | Advances in Materials Science and Engineering |
6. | R. Ramadoss | Cocos nucifera husk biocarbon and FeSi3 on EMI shielding behavior of PVA composites | SCI | 4.05 | November 2022 | 2023 | Biomass Conversion and Biorefinery |
7. | S. Sathyanarayanan | Experimental study on dual oxygenates (ethanol, n‑butanol) with gasoline on MPFI engine performance and emission characteristics | SCI | 3.5 | February 2023 | 2023 | International Journal of Environmental Science and Technology |
8. | S. Sathyanarayanan | Transesterification of waste cooking oil to biodiesel by walnut shell/sawdust as a novel, low-cost and green heterogeneous catalyst: Optimization via RSM and ANN | SCI | 6.4 | January 2023 | Volume 193 | Industrial Crops & Products |
9. | K. Giridharan | Friction stir processing of nanofiller assisted AISI 1010 steel-CDA 101 copper dissimilar welds: a strength factor approach | SCI | 0.94 | July 2022 | Volume 119 | Metallurgical &Research Technology |
10. | M. Naresh Babu | Ionic liquids assisted LQL for turning PH steels: smart methodology | SCI | 4.78 | February 2023 | 2023 | Materials and Manufacturing Processes |
11. | Ashok KG | Calotropis gigantea stem fiber reinforced thermoset plastics: Interlaminar shear strength and related tribo-mechanical properties | SCI |
2.66 |
September 2022 | 2023 | Journal of Materials: Design and Applications |
12. | Ashok KG | Mechanical Performance of Luffa Fiber Reinforced Polypropylene Composites using Injection Moulding | SCOPUS | NA | June 2022 | Volume 14 issue 03 | International Journal of Vehicle Structures & Systems |
13. | K.K. Naga Chandrika | Investigation of CI Engine Performance and Emission Characteristics of Biodiesel Blend with Aluminium Oxide | SCOPUS | NA | December 2022 | Volume 14 issue 04 | International Journal of Vehicle Structures & Systems |
14. | K.R. Sureshkumar | Effects of Hybrid Nanoparticles on Thermophysical Property of Cu-TiO2 Embedded Palmitic Phase Change Material for Energy Storage Applications | SCOPUS | NA | December 2022 | Volume 14 issue 04 | International Journal of Vehicle Structures & Systems |
15. | K. Karthikeyan | Evaluation and Optimization of Plastic Pyrolysis Blends Performance on Diesel Engine with Ethanol Additive using Full Factorial Design | SCOPUS | NA | December 2022 | Volume 14 issue 04 | International Journal of Vehicle Structures & Systems |
16. | S. Prasanna Raj Yadav | Characteristics of a CRDI Engine Fuelled by Waste Transformer Oil with High Fuel Injection Pressure | SCOPUS | NA | June 2022 | Volume 14 issue 03 | International Journal of Vehicle Structures & Systems |
17. | M. Raju | Investigation of Microstructural, Mechanical and Tribological Properties of Al8011-TiC Metal Matrix Nano-Composites | SCOPUS | NA | June 2022 | Volume 14 issue 03 | International Journal of Vehicle Structures & Systems |
Academic Year (2021-2022)
Sl. No. | Name of the faculty | Research Paper Title | Index | Impact factor | Month & Year | Volume/ Issue/ Pg. no. | Journal Name |
1 | Giridharan. K. | Sustainability and Environmental Impact of Ethanol and Oxyhydrogen Addition on Nanocoated Gasoline Engine | SCIE | 7.778 | Jan-22 | Volume 2022 | Bioinorganic Chemistry and Applications |
2 | Prasanna Raj Yadav. S. | Experimental study of feasibility of orange peel oil as a partial replacement for gasoline fuel in SI engine with and without MAO coated piston | SCIE | 6.609 | Jan-22 | Volume 315 | Fuel |
3 | Antony Aroul Raj. V | Performance evaluation of phase change material integration in buildings using novel non-dimensional performance parameters for different cities and months in India | SCIE | 6.583 | Aug-2021 | Volume 42 | Journal of Energy Storage |
4 | NareshBabu.M, VetrivelSezhian. M | Influence of graphene nanofluid on various environmental factors during turning of M42 steel | SCIE | 5.684 | Jul-21 | Volume 68, Pages 90-103 | Journal of Manufacturing Processes |
5 | Giridharan. K | Energy recovery of waste plastics into diesel fuel with ethanol and ethoxy ethyl acetate additives on circular economy strategy | SCIE | 4.996 | Mar- 2022 | Volume 12 Issue 1 | Scientific Reports |
6 | Thavasilingam..K,Giridharan.K. | Effect of fumed silica in rice bran wax-epoxy coating on aluminum substrate: mechanical, thermal, and water absorption properties | SCIE | 4.987 | Sep-21 | Volume 2021 | Biomass Conversion and Biorefinery |
7 | Babu. M | Role of cashew shell biochar on EMI shielding behaviour of carbon fibre epoxy nanocomposites in E, F, I and J ban microwave frequencies | SCIE | 4.987 | Mar-22 | Volume 2022 | Biomass Conversion and Biorefinery |
8 | Karthick.S, Giridharan. K | Effect of brown rice husk α-Si3N4 on Ni–P composite coating of austenitic AISI 316L steel: Taguchi grey relational approach | SCIE | 4.987 | Nov – 2021 | Volume 2022 | Biomass Conversion and Biorefinery |
9 | Naresh Babu. M,VetrivelSezhian.M | Effect of ionic liquid as lubricants in turning H 13 tool steel- an experimental study | SCIE | 4.616 | Mar-2022 | Volume 2022 | Materials and Manufacturing Processes |
10 | Kalimuthu Gopi Kannan | Thermodynamic and economic analysis of heat pump-assisted solar still using paraffin wax as phase change material | SCIE | 4.223 | Nov-21 | Volume 29 , Issue 2 | Environmental Science and Pollution Research |
11 | Yuvaraj.G | Evaluation of Physicothermal Properties of Silicone Oil Dispersed with Multiwalled Carbon Nanotubes and Data Prediction Using ANN | SCIE | 3.791 | Dec-21 | Vol 2021, Article number 3444512 | Journal of Nanomaterials |
12 | Prasanna Raj Yadav.S | Sustainability Improvement of Ethanol Blended Gasoline Fuelled Spark Ignition Engine by Nanoparticles | SCIE | 3.791 | May- 2022 | Volume 2021 | Journal of Nanomaterials |
13 | VetrivelSezhian.M | Energy absorption performance of Kevlar/snake grass fiber composites under ballistic impact test with nano Al2O3 inclusion | SCIE | 6.609 | Jun-22 | Volume 2022 | Polymer Composites |
14 | Ashok. K.G | Experimental studies on interlaminar shear strength and dynamic mechanical analysis of luffa fiber epoxy composites with nanoPbO addition | SCIE | 2.926 | Dec- 2021 | Volume 51/ Issue 3 | Journal of Industrial Textiles |
15 | Peter Pushpanathan.D. | Investigations on the properties of composite coatings electro co-deposited on AZ80 Mg alloy using triangular waveform pulse current | SCIE | 2.352 | Dec-21 | Vole 9, Issue 4, Article No 045048 | Surface Topography: Metrology and Properties |
16 | Elumalai. B | The effect of discharge energy and nano Al2O3 on μED milling of Inconel 718 | SCIE | 2.352 | Dec-21 | Volume 9, Issue 4 2021 | Surface Topography: Metrology and Properties |
17 | Antony Aroul Raj, V. | A pathway towards healthy and naturally ventilated indoor built environment through phase change material and insulation techniques for office buildings in India | SCIE | 1.882 | Nov-21 | Vol 236 / Issue 3 | Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy |
18 | Prasanna Raj Yadav.S | Performance and Emission Characteristics of Pyrolysis Oil Obtained from Neem de Oiled Cake and Waste Polystyrene in a Compression Ignition Engine | SCIE | 1.726 | Dec-2021 | Volume 2021 | Advances in Materials Science and Engineering |
19 | VetrivelSezhian. M, Giridharan.K., Pushpanathan.D, Chakravarthi.G | Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints | SCIE | 1.726 | Sep-21 | Vol 2021, Article number 4113895 | Advances in Materials Science and Engineering |
20 | Babu.M | Optical Microstructure, FESEM, Microtensile, and Microhardness Properties of LM 25-B4Cnp-Grnp Hybrid Composites Manufactured by Selective Laser Melting | SCIE | 1.726 | Jan-22 | Volume 2022 | Advances in Materials Science and Engineering |
21 | VetrivelSezhian. M | Investigation of Friction Stir-Welded B4C Particles-Reinforced Copper Joint: Mechanical, Fatigue, and Metallurgical Properties | SCIE | 1.726 | May-22 | Volume 2022 | Advances in Materials Science and Engineering |
22 | Jothiprakash. V.M | Optimization of Process Parameters for Friction Stir Welding of Different Aluminum Alloys AA2618 to AA5086 by Taguchi Method | SCIE | 1.726 | Jan-22 | Volume 2022 | Advances in Materials Science and Engineering |
23 | Yuvaraj. G | Characterization of the Aluminium Matrix Composite Reinforced with Silicon Nitride (AA6061/Si3N4) Synthesized by the Stir Casting Route | SCIE | 1.726 | Jan-22 | Volume 2022 | Advances in Materials Science and Engineering |
24 | Giridharan. K. | Microstructural Analysis and Mechanical Behaviour of Copper CDA 101/AISI-SAE 1010 Dissimilar Metal Welds Processed by Friction Stir Welding | SCIE | 1.524 | Jan-22 | Volume 25 | Materials Research |
25 | Elumalai. B | Experimental investigations on μED milling of Inconel 718 with nanoSiC abrasive mixed dielectric | SCIE | 1.524 | Nov-21 | Volume 25 | Materials Research |
26 | Naresh Babu. M | Turning SKD 11 steel using silver nanofluids with minimum quantity lubrication | ESCI | 1.03 | Jul-21 | Volume 11, Issue 3, Pages 74-95 | International Journal of Manufacturing, Materials, and Mechanical Engineering |
27 | Ramadoss. R | Surface Ignition using ethanol on Mo and Al2 O3-TiO2 coated in CI engine for environmental benefits | Scopus | 0.3 | Aug-21 | Volume 7, Issue 1, Pages 19-27 | Advances in Environmental Technology |
28. | Peter Pushpanathan. D, | Investigations on the microstructure and microhardness of the friction stir processed AZ80 surface composites | Scopus | 0.402 | May-22 | Volume 2463 | AIP Conference Proceedings |
29. | Joel.C | Numerical Investigation on Temperature Distribution of Triangular and Rectangular Shaped Aluminum and Copper Fins | Scopus | 0.52 | May-22 | Pages 225-233 | Lecture Notes in Mechanical Engineering |
30. | Raju. M | Optimization of friction surfaced deposits of aluminium alloy 6068 over low carbon steel | Scopus | 1.46 | May-22 | Volume 62 | Materials Today: Proceedings |
31. | Babu.M | Design and optimization of linear Fresnel reflector concentrating solar system using particle swarm optimization algorithms | Scopus | 1.46 | April-22 | Volume 66 | Materials Today: Proceedings |
32. | Jeremiah.R, Paulmer Pushparaj. J | Optimization of Parameters to Improve Effectiveness of Plate and Fin Heat Exchangers using Taguchi Method and CFD Analysis | Scopus | 0.953 | June- 2022 | Volume 14, Issue 3,397-400 | International Journal of Vehicle Structures and Systems |
33. | Joel.C | Evaluation of Waste Plastic Pyrolysis Oil Performance with Diethyl Ether Additive on Insulated Piston Diesel Engine | WoS | 0.7 | November 2021 | Volume 20, Issue 5, Pages 2079-2086 | Nature Environment and Pollution Technology |
Academic Year (2020-2021)
Sl. No. | Name of the faculty | Research Paper Title | Index | Impact factor | Month & Year | Volume/Issue/Pg. no. | Journal Name |
1. | Antony Aroul Raj .V | The contribution of dry indoor built environment on the spread of Coronavirus: Data from various Indian states | SCIE | 7.587 | November 2020 | Volume 62, Article number 102371 | Sustainable Cities and Society |
2. | Prasanna Raj Yadav .S. | Effect of nozzle hole geometry on the operation of kapok biodiesel in a diesel engine | SCIE | 6.609 | September 2020 | Volume 276, Article number 118114 | Fuel |
3. | Antony Aroul Raj. V | Experimental and computational investigation of engine characteristics in a compression ignition engine using mahua oil | SCIE | 6.609 | September 2020 | Volume 284, Article number 119007 | Fuel |
4. | Antony Aroul Raj. V | Review on numerical algorithms for melting and solidification studies and their implementation in general purpose computational fluid dynamic software | SCIE | 6.583 | February 2021 2020 | Volume 36, Article number 102341 | Journal of Energy Storage |
5. | NareshBabu M. | Performance of ionic liquid as a lubricant in turning inconel 825 via minimum quantity lubrication method | SCIE | 5.684 | February 2021 | Volume 64, Pages 793-804 | Journal of Manufacturing Processes |
6. | Ashok. K, Ajith. D., | Influence of Nanofiller Lignite Fly Ash on Tribo-Mechanical Performance of SansevieriaRoxburghiana Fiber Reinforced Epoxy Composites | SCIE | 5.323 | March 2021 | Volume 19,Issue 22, Pages 6000-6014 | Journal of Natural Fibers |
7. | Giridharan. K., Gurijala. C., | Biochar-assisted copper-steel dissimilar friction stir welding: mechanical, fatigue, and microstructure properties | SCIE | 4.987 | April 2021 | Volume 2021 | Biomass Conversion and Biorefinery |
8. | Ashok. K.G. | Mechanical, ballistic impact, and water absorption behavior of luffa/graphene reinforced epoxy composites | SCIE | 3.171 | August 2020 | Volume 41, Issue 11, Pages 4716-4726 | Polymer Composites |
9. | Ramadoss.R. | Finite element simulation and regression modeling of machining attributes on turning AISI 304 stainless steel | ESCI | 2.957 | January 2021 | Volume 8, Article number 2021022 | Manufacturing Review |
10. | Ajith.D | An overview of additive manufacturing technologies for musical wind instruments | ESCI | 2.11 | January 2021 | Volume 3, Issue 2, Article number 162 | SN Applied Sciences |
11. | Ravivarman R., | Estimation of loss factor based on the load share model in improved bending strength spur gear drive system | SCIE | 1.818 | July 2020 | Volume 235, Issue 1, Pages 33-45 | Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology |
12. | VetrivelSezhian M, Giridharan K,Pushpanathan, D, Chakravarthi.G | Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints | SCIE | 1.726 | September 2021 | Volume 2021, Article number 4113895 | Advances in Materials Science and Engineering |
13. | Antony Aroul Raj. V | Thermal Management Analysis of Pcm Integration in Building Using a Novel Performance Parameter Pcm Effectiveness Index | SCIE | 1.625 | January 2021 | Vol 26 / Issue 2 | Thermal Science |
14. | Omsakthivel .U | Performance and emission characteristics of a micro-gasifier-based cook stove using solid biomass, meliadubia and casuarina | SCIE | 0.87 | April 2021 | Volume 45, Issue 4, Pages 573-583 | Transactions of the Canadian Society for Mechanical Engineering |
15. | Joel .C Muthukumaran S. | Parametric optimization of abrasive water jet machining of C360 brass using MOTLBO | Scopus | 1.46 | August 2020 | Volume 37, Issue Part 2, Pages 1905-1910 | Materials Today: Proceedings |
16. | Paulmar Pushparaj. J, Jeremiah. R, Prabhakaran.D Billi.D Giridharan. K | Experimental investigation and Optimization of FSW on Eglin Steel | Scopus | 0.48 | December 2020 | Volume 988, Issue 1, Article number 012057 | IOP Conference Series: Materials Science and Engineering |
17. | Dillibabu V., Billy D. | Emission characteristics study of Gasoline-Diesel and Gasoline-Diesel/pentanol blend | Scopus | 0.48 | September 2020 | Volume 988, Issue 1, Article number 012050 | IOP Conference Series: Materials Science and Engineering |
18. | Bharath.N. | Emission study of titanium oxide nano-additive blended rice bran biodiesel in a diesel engine | Scopus | 0.402 | December 2020 | Volume 2311, Article number 020047 | AIP Conference Proceedings |
19. | Ramya Suresh | Experimental investigation on equally treated banana/sisal fibers based hybrid composite | Scopus | 0.402 | October 2020 | Volume 2283, Article number 020083 | AIP Conference Proceedings |
20. | Karthick.S PrasannaRaj Yadav S., Senthilnathan K | Experimental investigation on influence of chemical treatment for natural fibers in hybrid composite of G/SB/SB/SB/G | Scopus | 0.402 | October 2020 | Volume 2283, Article number 020082 | AIP Conference Proceedings |
21. | Ramadoss. R. | Analysis of Thermal Barrier Coating’s Behaviors on Alloys – A Review | Scopus | 0.48 | September 2020 | Volume 954, Issue 1, Article number 012025 | IOP Conference Series: Materials Science and Engineering |
22. | Ramadoss. R. | Optimization of Wire Cut EDM Process Parameters of Al/SiO2Composites Using Taguchi Method | Scopus | 0.615 | September 2020 | Issue 2020 | SAE Technical Papers |
23. | Joel C. | Optimization of machinability parameters in abrasive water jet machining of AA7075 using Grey-Taguchi method | Scopus | 1.46 | July 2020 | Volume 37, Issue Part 2, Pages 737-741 | Materials Today: Proceedings |
24. | Joel C., Muthukumaran S. | Parametric optimization of abrasive water jet machining of C360 brass using MOTLBO | Scopus | 1.46 | August 2020 | Volume 37, Issue Part 2, Pages 1905-1910 | Materials Today: Proceedings |
25. | VetrivelSezhian M., Ramadoss R., Giridharan K., Chakravarthi G . | Comparative study of friction stir welding process and its variables | Scopus | 1.46 | September 020 | Volume 33, Pages 4842-4847 | Materials Today: Proceedings |
26. | Gopinath B, Ashok K.G. | A systematic study of the impact of additives on structural and mechanical properties of Magnetorheological fluids | Scopus | 1.46 | August 2020 | Volume 37, Issue Part 2,Pages 1721-1728 | Materials Today: Proceedings |
27. | Ashok.K.G, Elango. V, Ajith.D, Gopinath. B, Raju. M. | Mechanical and morphological properties of luffa/carbon fiber reinforced hybrid composites | Scopus | 1.46 | July | Volume 33,Pages 637-641 | Materials Today: Proceedings |
28. | Ramadoss. R. | Studies on mechanical properties and characterization of carbon fiber reinforced hybrid composite for aero space application | Scopus | 1.46 | May 2021 | Volume 47, Pages 4438-4443 | Materials Today: Proceedings |
29. | Ashok K.G. | Thermal performance of Lithium-Ion battery pack using forced air circulation system | Scopus | 1.46 | March 2021 | Volume 46, Pages 3670-3676 | Materials Today: Proceedings |
30. | Ashok K.G. | Effect of palmitic and oleic acid mixture on performance and emission analysis of a di diesel engine | Scopus | 1.46 | December 2020 | Volume 45, Pages 6292-6297 | Materials Today: Proceedings |
31. | Elumalai. B, Omsakthivel .U, Yuvaraj. G, Giridharan .K | Optimization of friction welding parameters on aluminium 7068 alloy | Scopus | 1.46 | October 2020 | Volume 45, Pages 1919-1923 | Materials Today: Proceedings |
Academic Year (2019-2020)
Sl. No. | Name of the faculty | Research Paper Title | Index | Impact factor | Month & Year | Volume/ Issue/ Pg. no. | Journal Name |
Prasanna Raj Yadav S. Karthick S. Senthilnathan K. | Fundamental droplet evaporation and engine application studies of an alternate fuel produced from waste transformer oil | SCIE | 6.609 | October – 2019 | Volume 259, Article number 116253 | Fuel | |
Prasanna Raj Yadav S. | Impact of fuel injection pressure on the engine characteristics of CRDI engine powered by pine oil biodiesel blend | SCIE | 6.609 | March – 2020 | Volume 264, Article number 116760 | Fuel | |
Antony Aroul RajV | Effect of phase change material integration in clay hollow brick composite in building envelope for thermal management of energy efficient buildings | SCIE | 2.692 | August – 2019 | Volume 43, Issue 4, Pages 351-364 | Journal of Building Physics | |
Ashok, K.G., Damodaran, A | Effect of Nano Fillers on Mechanical Properties of Luffa Fiber Epoxy Composites | SCIE | 3.507 | June – 2020 | Vol 19 / Issue 4 | Journal of Natural Fibers | |
Radhika.K | Waste heat recovery through cascaded thermal energy storage system from a diesel engine exhaust gas | SCIE | 2.326 | Vol 43 / Issue 1 | International Journal of Ambient Energy | ||
Radhika, K. | An insight into the stress corrosion cracking resistance of friction stir processed and micro arc oxidation coated ZE41 grade magnesium alloy | SCIE | 2.069 | April – 2020 | Vol 236 / Issue 2 | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | |
Ravivarman R. | Performance enhancement of normal contact ratio gearing system through correction factor | ESCI | 1.495 | September – 2019 | Volume 13, Issue 3, 2019, Pages 5242-5258 | Journal of Mechanical Engineering and Sciences | |
Ramadoss R. | Grey relational analysis-based optimisation of input parameters of incremental forming process applied to the AA6061 alloy | SCIE | 0.743 | May – 2020 | Volume 44, Issue 1, Pages 93-104 | Transactions of Famena | |
Yuvaraj G. | Experimental research on hybrid natural/glass fiber based epoxy composite | Scopus | 1.25 | October – 2019 | Volume 9, Issue 1, October 2019, Pages 3359-3362 | International Journal of Engineering and Advanced Technology | |
Billy D., PaulmarPushparaj J VetrivelSezhian M., Omshakthivel U. | Structural and mechanical design of solar tracking system | Scopus | 1.25 | September – 2019 | Vol 8, Issue 6 Special Issue 3, September 2019, Pages 1425-1431 | International Journal of Engineering and Advanced Technology | |
Karthikeyan K., Naga Chandrika K.K., Deepan Raj Kumar A., Thiagarajan S., | Research on mechanical behavior of AMMC (Al-SiC) composite in disc brake | Scopus | 1.25 | September – 2019 | Vol 8,Issue6 Special Is. 3, September 2019, Pages 1432-1437 | International Journal of Engineering and Advanced Technology | |
Jeremiah R., Prabhakaran D., Jothi Prakash V.M., | Design and fabrication of centre line marker | Scopus | 1.25 | September – 2019 | Vol 8, Issue 6 Special Is. 3, Sep 2019, Pages 1438-1442 | International Journal of Engineering and Advanced Technology | |
Joel C. | Machinability optimization of abrasive water jet cutting process on AA6082 aluminium alloy | Scopus | 1.25 | August – 2019 | Vol 8, Issue 10, August 2019, Pages 2134-2140 | International Journal of Engineering and Advanced Technology | |
Giridharan, K, Senthilnathan, K., Muthukumaran, S., | Experimental study on mechanical properties of friction stir welded dissimilar joints of Aluminium alloys AA8011-AA6082 | Scopus | 0.53 | August – 2019 | Volume 11, Issue 2, 2019, Pages 135-139 | International Journal of Vehicle Structures and Systems | |
Karthick S., Prasanna S Yadav R., Joel C., Senthilnathan K., | A straightforward trail study on analysis of thickness variation of black nickel coating on stainless steel surface for emissivity | Scopus | 1.46 | June – 2020 | Volume 37, Issue Part 2, Pages 129-132 | Materials Today: Proceedings | |
Ravivarman R. | Effect of module on wear reduction in high contact ratio spur gears drive through optimized fillet stress | Scopus | 0.52 | April – 2020 | Pages 239-250 | Lecture Notes in Mechanical Engineering | |
V. Antony Aroul Raj | Performance analysis of concrete block integrated with PCM for thermal management | Scopus | 1.46 | July – 2019 | Volume 22, Pages 370-374 | Materials Today: Proceedings | |
Ramadoss R. | Hybrid Fuzzy based response surface optimization of welding parameters on Vickers microhardness and impact strength of FSWed AA8011-H24 aluminium alloy joints | Scopus | 1.46 | July – 2019 | Volume 23, Pages 573-582 | Materials Today: Proceedings |
Name of the faculty | Project Title | Industry | Amount (Rs.) | Date |
Dr. R. Ramadoss Mr.M. Raju | Metal Casting: Sand core used part surface finish improvement | Sri Balaji Castings Pvt.LTd. Chennai | 50,000 | 21.11.2022 |
Dr. V. Antony Aroul Raj | Static Liquid air Mixture analysis along with CFD Validation | Ensycon Environmental lab, Chennai | 1,00,000 | 09.06.2022 |
Dr. V. Antony Aroul Raj | CFD analysis of Air filter system | CG Enterprises, Chennai | 45,000 | 11.03.2022 |
Dr. V. Antony Aroul Raj | HVAC -Design | Ozone VAC | 2,00,000 | 11.10.2021 |
Dr.M.Vetrivelsezhian Dr. S. Prassana Raj Yadav | Thermal analysis of cooling chamber in Injection molding | SR Precision Engineering | 26,000 | 27.03.2021 |
Dr. V. Antony Aroul Raj | Implementation of Turbulence model Using CFD | EnSol Energy Solution Providers | 25,000 | 07.03.2019 |
Dr.M.Vetrivelsezhian Dr. S. Prassana Raj Yadav | Analysis of Heat Exchanger used in the Milk chilling process | Midvalley foods Pvt Ltd | 25000 | 26.10.2018 |
Dr. R. Ramadoss Mr.S.Muthukumaran | Performance Analysis of cover sealed brake | CGNF India Pvt Ltd | .25000 | 26.10.2018 |
Dr. Antony Aroul Raj | FEA analysis of foldable hanger Door and providing Technical support | Seetha Technologies | 35000 | 08.06.2018 |
Dr. V. Antony Aroul Raj | FEA analysis of Ship hanger door system | Seetha Technologies | 25,000 | 30.03.2018 |
Dr.V.AntonyAroul Raj | Technical Support for design and Analysis of Helicopter landing system | Seetha Technologies Chennai | 25,000 | 20.11.2017 |
Dr.V.AntonyAroul Raj | Re- engineering of valve seal stem | Madura rubbers | 50,000 | 02.07.2017 |
Bharathi Salai, Ramapuram,
Chennai – 600 089. Tamil Nadu India
Bharathi Salai, Ramapuram,
Chennai – 600 089. Tamil Nadu India
Bharathi Salai, Ramapuram,
Chennai – 600 089. Tamil Nadu India